ETUKER,/Batetela457159.html,Wiring,Circuit,Socket,Plug,13,film.iafricafestival.com,Light,Tester,,Trailer,Transporting Storage , Trailer Couplings Accessories , Universal Accessories,Pin,$13 ETUKER 13 Pin Trailer Light Wiring Plug Socket Circuit Tester Gifts ETUKER,/Batetela457159.html,Wiring,Circuit,Socket,Plug,13,film.iafricafestival.com,Light,Tester,,Trailer,Transporting Storage , Trailer Couplings Accessories , Universal Accessories,Pin,$13 ETUKER 13 Pin Trailer Light Wiring Plug Socket Circuit Tester Gifts $13 ETUKER 13 Pin Trailer Light Plug Socket Wiring Circuit Tester, Transporting Storage Trailer Couplings Accessories Universal Accessories $13 ETUKER 13 Pin Trailer Light Plug Socket Wiring Circuit Tester, Transporting Storage Trailer Couplings Accessories Universal Accessories

ETUKER 13 Pin Trailer Light Wiring Spring new work one after another Plug Socket Circuit Tester Gifts

ETUKER 13 Pin Trailer Light Plug Socket Wiring Circuit Tester,

$13

ETUKER 13 Pin Trailer Light Plug Socket Wiring Circuit Tester,

|||

Product description

Colour Name:13 Pin Trailer Tester

ETUKER 12V 13 Pin Trailer Lights Plug amp; Socket Wiring Circuit Tester is designed for testing the lighting circuits on both towing vehicles and Trailers/RV/Caravan/Boat/Car etc.

It has one side to connect to the 13-pins plug of a trailer and the other side to the 13 pins socket of the towing vehicle Simply plug it directly into either 13-pin N-type plugs or sockets and gives a continuity test on all lighting circuits.

Specifications:
Material: Plastic amp; Brass
Voltage: 12V DC
Contents: 1pcs - 13 pin tester
Color: Black
Item Type: Diagnostic Tools
Item Name: Trailer Tester
Battery Type: 9V (the battery is not included)

Way of use:
1. Connect the tester with plug or socket.
2. Press the yellow button on the side of the tester.
3. If the wiring is good, all the LEDs will light up.
For Car (camper)
1. Put the tester in the socket of the car.
2. Press the yellow button on the side of the tester.
3. If the wiring is good, all the LEDs light up. Do the step again as Trailer guide beside.
For Trailer (can be a caravan or bicycle carrier)
1. Put the plug in the connection of the tester.
2. Press the yellow button on the side of the tester.
3. If the wiring is good, all the LEDs light up. The function of each LED as "Signal of LED" shows

If a LED doesn't light up, because the corresponding wire is defective. If all the LEDs don't light up, then the mass wire is damaged or all bulbs are defective.

ETUKER 13 Pin Trailer Light Plug Socket Wiring Circuit Tester,